Foil-PE Mesh backing (Closer PE Mesh) code FEM7225A
CODE: FEM7225A
PRODUCT DESCRIPTION
Foil-PE Mesh backing (Closer PE Mesh) code FEM7225A, combined with high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.
FEATURES
• Foil-PE Mesh backing provides excellent reflection of both heat and light.
• High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-PE Mesh Facing joints and seams sealing in HVAC ductwork application.
• Low moisture vapor transmission rate makes BondTape FEM7225A an excellent vapor barrier.
• Service Temperature range from -30 ~ +120 °C (-22~ +248 °F).
TYPICAL PHYSICAL PROPERTIES
|
PROPERTIES |
METRIC |
ENGLISH |
TEST METHOD |
|
Backing Thickness |
125 Micron |
5.0 Mil |
PSTC-133 / ASTM D 3652 |
|
Total Thickness |
175 Micron |
7.0 Mil |
PSTC-133 / ASTM D 3652 |
|
Adhesion to Steel |
20 N/25mm |
72 Oz./In. |
PSTC-101 / ASTM D 3330 |
|
Tack Rolling Ball |
20 cm |
8.0 In. |
PSTC-6 / ASTM D 3121 |
|
Tensile Strength |
100 N/25mm |
22.7 Lb/In |
PSTC-131 / ASTM D 3759 |
|
Elongation |
25.0%. |
25.0% |
PSTC-131 / ASTM D 3759 |
|
Service Temperature |
-30 ~ +120 °C |
-22 ~ +248 °F |
———— |
|
Applying Temperature |
+10 ~ 40 °C |
+50 ~ +105 °F |
———— |
TYPICAL APPLICATIONS
HVAC industry for joining and sealing Foil-PE Mesh laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections.
PRODUCT FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2″) / 60 / 63mm (2.5″) / 72 / 75mm (3″) / 96mm / 100mm (4″)
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 750m / 850m
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
STORAGE & SHELF LIFE
12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).
CONTACT
PRODETECH ., LTD
Factory : Phu Cat – Quoc Oai District – Ha Noi City
Office : Shop-House b5-20, Vinhomes Gardenia Ham Nghi, Nam Tu Liem District, Ha Noi City.
Hotline : 0913.554.030 – 0904 698 379 – 0936 382 469
Website :3wtape.vn ; prodetech.vn ; beeflex.com.vn ; nanoflex.com.vn ;atata.com.vn ; microflex.com.vn
Contact Us
We are committed to product quality The production management process is strictly adhered to ISO 9001: 2015 and ISO 14000: 2015
Phone
0913 554 030 / 0904 698 379 /0936 382 469
sales.3wtape@gmail.com